Fiido Charger Q1 / Q1S / D1 / D2 42v for 36v Battery (Safety Mark Approved) for 36V Battery

Price in points: 30 points
Reward points: 1 point
In Stock
o12
-14%
SGD $29.90
(Including 7% GST)
List price: SGD $34.90
For collection of product, please proceed to warehouse/service centre.  This charger output is 42V , Suitable for all Fiido Q1 Q1S D1 D2 Scooters using 36v batteries 42v 2A Singapore Safety Mark Certified Replacement...
+

For collection of product, please proceed to warehouse/service centre. 

This charger output is 42V , Suitable for all Fiido Q1 Q1S D1 D2 Scooters using 36v batteries

42v 2A

Singapore Safety Mark Certified

  • Replacement damage or missing parts for Shengte 8inch / Passion 8"
  • Suitable for Passion10 / Passion 8 / Goboard pro 8inch 
Protection Function:
1.The power supply will be auto recovered when short circuit faults remove.

2. Over current Protection:
The power supply will be auto recovered when over current faults remove.
2.1. Over Voltage Protection
The output shall be protected to latch off at over-voltage condition, maximum value can’t be over 72V.
That might be return to normal state by AC reset .
The reset time must less than 2min
2.2. Short Circuit protection
Output can be shorted without damage.
The adaptor shall be auto-recovery. (It will enter into normal condition when the fault condition is removed.)
3. Battery polarity Reverse polarity protection
When the battery polarity is reversed, the charger automatically cut off the output, the output voltage is 0. 
When troubleshooting, the normal polarity connection, the charger will resume normal operation.